Guttering Stopend – PVC – Residential & Commercial

Product Overview

This 112mm Half Round External Stopend in White is designed to provide a sealed external termination to half round gutter runs. It's fully compatible with 112mm half round gutter fittings and is manufactured from impact-resistant PVC with UV stability, ensuring a long service life. The external-fit design securely caps the gutter end, and the white finish complements light-colored rooflines.

Features & Benefits

• Durable Construction: Made from impact-resistant uPVC for long-lasting performance.
• Secure Compatibility: Compatible with 112mm half round fittings for easy connection.
• Sealed Termination: Provides a watertight closure at the end of a gutter run.
• External Fit: Caps the gutter externally for straightforward installation.
• Aesthetic Match: White finish complements light-colored rooflines.
• System Size: 112mm size for consistent fit across the system.

Applications

• End Terminations: Finishes open gutter ends on straight roofline runs.
• Repairs: Replaces damaged or missing end caps in existing 112mm systems.
• Extensions: Provides termination on new gutter additions.
• Refurbishment: Updates older systems with modern sealing performance.

Installation Guidance

• Clean Seat: Wipe the gutter end to ensure a clean mating surface.
• Engage Clip: Press the stop end evenly onto the gutter until fully seated.
• Support: Fit a fascia bracket within 150mm of the stop end.
• Seal Check: Confirm correct compression of the sealing surface.
• Inspection: Periodically check for debris buildup at the termination point.

Compliance & Performance

• Material: Unplasticised polyvinyl chloride (uPVC).
• Temperature Performance: Designed for service from -20°C to +60°C.
• UV Resistance: Tested to maintain color and performance over time.
• Load Capacity: Conforms to BS EN 607 for rainwater systems.
• Important Note: Ensure seals are not lubricated with petroleum products; use clean water only.

FAQ

• Q: Can this stopend be used with other gutter sizes?
  A: No, it is specifically designed for 112mm half round gutter systems.
• Q: How do I ensure a watertight seal?
  A: Ensure all surfaces are clean and free of debris before installation.
• Q: Is additional support required?
  A: Yes, fit a fascia bracket within 150mm of the stop end for support.