Downpipe Offset Bend – PVC – Exterior Drainage

Product Overview

Enhance your drainage system with the 65mm Square Downpipe Offset Bend in white, featuring a 112.5-degree angle. This essential uPVC fitting expertly redirects 65mm square downpipes to navigate eaves, soffits, or wall projections.

Features & Benefits

• Durable Construction: Made from impact-resistant uPVC for long-lasting performance.
• Secure Compatibility: Fully compatible with 65mm square fittings for seamless connection.
• Directional Change: Provides a reliable 112.5-degree offset to overcome building projections.
• Maintained Flow: Smooth internal profile allows continuous water discharge.
• Aesthetic Match: White finish complements light-colored rooflines.

Applications

• Eaves Clearances: Offsets pipework around soffits and overhangs.
• Wall Projections: Navigates irregularities or stepped façades.
• Refurbishment: Replaces damaged offset bends in existing 65mm systems.
• Extensions: Provides directional change on new downpipe installations.

Installation Guidance

• Joint Seating: Ensure pipe ends are cut square and inserted fully into the bend.
• Bracket Placement: Fit supporting brackets close to the offset for stability.
• Alignment: Confirm correct orientation for the intended projection.
• Seal Engagement: Use 65mm square connectors for additional joints.
• Inspection: Check periodically for debris at directional changes.

Compliance & Performance

• Material: Unplasticised polyvinyl chloride (uPVC).
• Temperature Performance: Operates from -20°C to +60°C.
• UV Resistance: Maintains color and performance over time.
• Load Capacity: Conforms to BS EN 12200 for rainwater downpipes.
• Important Note: Avoid lubrication with petroleum products; use water only.